AS-1088 Dual-Head IP65 Emergency Light: Real Specs, Runtime and CE Certificate Facts
The Anshine AS-1088 is a wall-mounted dual-head IP65 emergency light: 10 W (2 x 5 W), 180-minute LiFePO4 backup, CE EMC certificate FTS26IC-04738E and LVD certificate FTS26IC-04738S, 100-piece MOQ and 30-day lead time.
The Anshine AS-1088 is a wall-mounted dual-head IP65 emergency light delivering 10 W (2 × 5 W) from a LiFePO4 3.2 V 4000 mAh battery, with a 180-minute emergency duration, a transfer time under 1 second, and CE certification recorded as EMC certificate FTS26IC-04738E and LVD certificate FTS26IC-04738S. Standard order terms are a 100-piece MOQ and a 30-day lead time.
How bright is the AS-1088 and how long does it run in an outage?
Each head uses SMT 2835 LEDs (96 pieces in total, 6.0 V). Light output is smoothly adjustable from 200 to 1000 lumens (20%–100% dimming), and correlated colour temperature is adjustable across eight steps from 2700K to 6500K. In emergency mode the fitting delivers 2 × 5 W (10 W total) for 180 minutes, switching from mains power in under 1 second. The battery is a LiFePO4 3.2 V 4000 mAh pack rated at 12.8 Wh, charged at 200 mA with a maximum charge time of 15 hours and a cycle life of at least 500 cycles to 80% of initial capacity.
Is the AS-1088 suitable for damp or dusty locations?
Yes. The enclosure is rated IP65 under IEC 60529 — dust-tight and protected against water jets from any direction — and it also carries an IK07 impact rating. The body is ABS + PC, measures 250 × 60 × 320 mm, and is designed for wall mounting. Rated operating temperature is 0 °C to +40 °C, with short-term operation from −5 °C to +50 °C. Input is AC 85–265 V, 50/60 Hz. These ratings make the AS-1088 a practical choice for stairwells, corridors, car parks and covered walkways where an emergency luminaire faces dust or moisture.
Which emergency lighting standard does the AS-1088 follow?
The AS-1088 is designed to IEC 60598-2-22, the standard for luminaires intended for emergency lighting, and its ingress protection is rated to IEC 60529 (IP65). Buyers specifying emergency lighting should ask for the exact standard number rather than a generic CE claim, so the submission can be checked against project requirements. Anshine is the trading brand of Anshine Technology Co., Ltd. (江门市安烁科技有限公司).
What CE certificate numbers apply to the AS-1088?
Anshine publishes the actual certificate numbers for the AS-1088: the EMC certificate is FTS26IC-04738E and the LVD certificate is FTS26IC-04738S, with matching test reports on file. The product is also declared RoHS compliant. When reviewing a supplier's documents, cross-check the certificate number and model against the published product record instead of accepting a general statement. Note that Anshine does not hold a CB certificate for this model.
What are the control options, warranty and order terms?
Operation is by physical key or a 433 MHz wireless remote control (about 30 m in open area, 15 m indoors line-of-sight), with a manual test button plus automatic monthly and annual testing. Built-in protection covers over-voltage, over-current, over-temperature, short-circuit and open-circuit conditions. Warranty is 3 years on the battery and 5 years on other parts. Minimum order quantity is 100 pieces and the stated lead time is 30 days.
For full specifications, see the AS-1088 product page, the AS-1088 remote-control two-head variant, and the complete emergency lighting range.
— Anshine Technology Co., Ltd.