EMC vs LVD: How to Read a CE Certificate for an Emergency Light (Buyers Guide)

· Anshine Technology Co., Ltd. · CE marking · EMC · LVD · EN 60598-2-22 · buyer guide · emergency lighting compliance

EMC vs LVD: How to Read a CE Certificate for an Emergency Light (Buyers Guide)

A CE certificate for an emergency light is two certificates, not one: EMC and LVD. This guide explains what each covers, how to read the certificate number, which standards apply to emergency luminaires, and the five questions that separate a real certificate from a marketing claim.

Short answer: A CE certificate for an emergency light is normally two certificates, not one. The EMC certificate covers electromagnetic compatibility (Directive 2014/30/EU) and the LVD certificate covers electrical safety (Directive 2014/35/EU). A supplier who shows you only one of them has not finished the job. Here is how to read what you are being shown, so you can verify it yourself in a few minutes.

Why emergency lighting needs two CE certificates

Emergency luminaires are mains-powered equipment with a battery, an LED driver, and a charging circuit. Two separate risk profiles fall under EU rules:

CertificateDirectiveWhat it provesCore standards
EMC2014/30/EUThe luminaire does not disturb other equipment and does not itself get disturbed beyond limits — emissions and immunityEN IEC 55015 (emissions), EN IEC 61547 (immunity), EN IEC 61000-3-2 (harmonics), EN 61000-3-3 (voltage fluctuations)
LVD2014/35/EUElectrical safety: electric shock, fire, temperature, insulation, and the specific construction rules for emergency luminairesEN IEC 60598-1 (general), EN IEC 60598-2-22 (emergency luminaires and exit signs), EN IEC 60598-2-1 (general purpose), EN 62471 and EN 62493 (photobiological safety)

EN IEC 60598-2-22 is the standard specific to this product category. A certificate that does not list it is not an emergency-lighting certificate.

How to read a certificate number

Certificate numbers are not standardised across the industry, but most follow the issuing laboratory's own series format. A typical Anshine certificate reads FTS26IC-04737E:

  • FTS — the issuing test laboratory
  • 26 — year of issue (2026)
  • IC — the laboratory's product series reference
  • 04737 — sequential number within that series
  • E — EMC certificate; S — LVD (safety) certificate

The companion test report usually carries the same digits with a different series marker: report FTS26IR-04737E backs certificate FTS26IC-04737E. If the certificate number and the report number do not correspond, stop there.

Five questions to ask before you order

  1. Which models does this certificate name? Certificates are issued for named models. A certificate that names one model does not cover the whole range.
  2. What is the certificate number, and can I see the one-page Certificate of Conformity? A number with no certificate behind it is not evidence.
  3. What is the matching test report number? The report is the evidence; the certificate is the summary.
  4. Which standards are listed, and does EN IEC 60598-2-22 appear? That is the emergency-lighting standard.
  5. What is the declared emergency duration and IP rating on the certificate itself? These should appear on the certificate, not only on the datasheet.

Three claims to treat with care

“CE certified” without a number. A CE mark is a manufacturer's declaration of conformity, and it is affixed to the product. The certificate number is what makes it verifiable. Always ask for the number.

“IP65 certified” treated as a certification. IP65 is an ingress protection rating from IEC 60529. It is a declared performance characteristic, not a certificate. It may appear on your LVD certificate as part of the approved product description — which is a meaningfully stronger statement — or it may appear only on a datasheet.

CE treated as a North American approval. CE is an EU framework. The United States and Canada use separate approvals: UL 924 for emergency lighting in the US, and CSA or cUL in Canada. A product with a CE certificate does not automatically carry these. Any supplier who implies otherwise will cost you time at inspection.

How to check us

We publish the certificate number, the test report number, the covered models and the standards for every model we have certified, and the certificates and reports themselves are downloadable from each product page. Our current index — AS-E305, AS-1088, AS-E303R/S/C and AS-E150W/E100W — is set out in our CE certificate index.

For a model not listed there, we will tell you honestly whether a certificate exists or whether testing is needed, rather than implying coverage we do not have. Ask us for the certificate number that applies to your exact model: contact our team.

More to read

Anshine AS-E303 Series Earns CE/RoHS Certifications Anshine's AS-E303 series gets CE & RoHS certs. IP67, 180-min duration, compliant with EU LVD. OEM/ODM available. Anshine AS-E303 Series Earns EU EMC Certification Anshine's AS-E303 series achieves EU EMC cert (FTS26EC-02177E). Class II, 4.95W, LiFePO4 battery, 85-265V. OEM/ODM… CE Certificate Index: Every Anshine Emergency Lighting Model, Certificate Number and Test Standard Anshine emergency lighting CE certificates are issued per model, not per company. Here is the complete index:…

Ask about this topic

Send your application and market and we answer with reference to your conditions.