IP65 Emergency Exit Signs: How to Specify for Wet and Dusty Sites
A practical specification guide for choosing IP65-rated emergency exit signs in car parks, warehouses and covered loading bays — with real model parameters from Anshine.
An exit sign for a wet or dusty site must be rated IP65 or higher — anything less will corrode and fail exactly when emergency lighting matters most. For car parks, warehouses and covered loading bays, specify a sealed aluminium body, LiFePO4 battery and at least 180 minutes of emergency duration.
Why does IP65 matter for emergency exit signs?
IP65 (IEC 60529) means the fitting is dust-tight and protected against water jets from any direction. Ordinary IP30 exit signs corrode in damp car parks and fail early. An IP65 aluminium body such as the Anshine AS-B109 is built for wet and dusty sites.
How long should the emergency backup last?
Specify a minimum of 180 minutes of emergency duration, backed by a LiFePO4 battery for longer cycle life and safer chemistry than standard Li-ion. The AS-B109 delivers 5 W output, 180-minute backup from a LiFePO4 3.2 V 1800 mAh pack, with under 1 second transfer time.
What mounting options should you require?
Different sites need different mounting. Look for a single SKU supporting ceiling, suspended, surface, wall and wire-hung mounting — the AS-B109 supports all five, with a 378 × 38 × 228 mm aluminium + PC body at 0.68 kg.
Which certifications should the datasheet show?
For European projects, require CE with LVD and EMC coverage plus RoHS. Verify the certificate numbers against the manufacturer's published index rather than accepting a generic claim. Anshine publishes its CE certificate index by model.
Related reading: emergency exit sign range, AS-B109 IP65 exit sign full specifications, and application solutions.
— Anshine Technology Co., Ltd.