Industrial & Warehouse Facilities

For warehouses and tunnels, Anshine specifies AS-1088 IP65 luminaires, AS-E305 self-test fittings and AS-F001/F002 for hazardous zones. What kills standard indoor units here is dust, wash-down water and high-bay access — not a lack of wattage. The AS-1088 is the workhorse: 10 W mains / 8 W emergency, 200–1000 lm adjustable, 3.2 V 4000 mAh LiFePO₄, 180 minutes, IP65, wireless and physical control, CE & RoHS. The AS-E305 adds ≥100 lm/W, ≥50,000 h and monthly/annual auto-test logging, so evacuation lighting stays at full output and the annual fire inspection has a record. For zones classified for explosion-proof equipment, specify AS-F001 / AS-F002 (IP54, 180 min) instead. All accept AC 85–265V 50/60Hz, with a 3-year battery and 5-year luminaire warranty.

What typically goes wrong

• Installing IP20 indoor twin-head units in dusty or wash-down bays — they fail within the first year
• Buying on headline wattage instead of emergency output in lumens for the full 180 minutes
• High-bay mounting that needs a scissor lift every time a battery is checked
• No automatic test log when the fire inspector asks for the annual record

How we address it

• AS-1088 — IP65, 10 W mains / 8 W emergency, 200–1000 lm adjustable, 3.2 V 4000 mAh LiFePO₄, 180 min, adjustable brightness and CCT, wireless + physical control: the default for tunnels, loading bays and wash-down areas.
• AS-E305 — IP65, ≥100 lm/W, ≥50,000 h, 3-hour LiFePO₄ backup, 433MHz control, monthly/annual auto-test: maintained output through evacuation with an inspection record.
• AS-F001 / AS-F002 — IP54 explosion-proof emergency luminaires, 180 min, for zones with flammable dust or vapour; use these where the site classification calls for explosion-proof equipment.
• AS-DY6401 / AS-DY7401 — split-battery drivers with 10–280 V DC constant-power output: add emergency function to existing high-bay or linear luminaires, and replace only the battery at end of life.

Relevant models