Residential & Retrofit Projects

For retrofits without rewiring, Anshine specifies AS-DY6401/7401 drivers, AS-B109 hanging signs and AS-E305 surface lights. Existing buildings rarely allow a new emergency circuit, so the fastest compliant route is to convert the luminaires already installed. The AS-DY6401 / AS-DY7401 are split-battery drivers with 10–280 V DC constant-power auto-adaptation for panel lights, batten lights, T5/T8 tubes, DOB and linear fixtures: 5 W / 180 min, monthly and annual auto-test, simulated mains-failure testing, and no-load / short-circuit / over-under-voltage / charge-current protection. When the battery ages, replace only the battery. For corridor direction, the AS-B109 hangs from the existing ceiling (IP65, 180 min, double-sided, five mounting ways). The AS-E305 adds surface or recessed mounting, IP65, 8-step 2700–6500K CCT and 20–100% dimming.

What typically goes wrong

• Rewiring an occupied apartment block just to add a dedicated emergency circuit
• Replacing a whole luminaire when only the battery has reached end of life
• Relying on the installer to press the test button every month, with no logged result
• Importing one sign SKU per mounting type for a small pilot order

How we address it

• AS-DY6401 / AS-DY7401 — split-battery emergency drivers, 5 W / 180 min, 10–280 V DC constant power for panel lights, batten lights, T5/T8 tubes, DOB and linear fixtures; monthly/annual auto-test, simulated mains-failure test, full electrical protection.
• AS-B109 — IP65, 180 min, double-sided, five mounting ways including hanging and ceiling: fits existing corridor ceilings without recessing or new conduit.
• AS-E305 — surface or recessed, IP65, 8-step 2700–6500K CCT, 20–100% dimming, 3-hour LiFePO₄ backup, 433MHz control: one fitting for hallways, stairwells and smart-home retrofits.
• All three accept AC 85–265V 50/60Hz, so the same SKU works in both 220V and 110V markets without a separate variant.

Relevant models