
AS-F001 Explosion-Proof LED Exit Sign, Die-Cast Aluminum IP65
库存 / Stock:100000
- Rated Power
- 3W @ 230Vac
- Emergency Duration
- ≥180 min
- IP Rating
- IP65
- Input Voltage
- AC 85-265 V, 50/60 Hz
- Certifications
- CE / RoHS
- Minimum Order Quantity
- 100
AS-F001 Explosion-Proof LED Exit Sign, Die-Cast Aluminum IP65 is AS-F001 explosion-proof LED exit sign: 3 W at 230 Vac, 12 pcs DIP 5 mm LEDs, Li-ion 3.7 V battery, 180-min emergency, AC 85-265 V, die-cast aluminum 370 x 70 x 170 mm, IP65, CE / RoHS.
Delivery time is counted after order confirmation and deposit.
Technical Specifications
| Model | AS-F001 | Rated Power | 3W @ 230Vac |
|---|---|---|---|
| Input Voltage | AC 85-265 V, 50/60 Hz | Battery Type | Li-ion 3.7 V |
| Battery Capacity | 1800 mAh | Battery Energy (Wh) | 6.66 Wh |
| Emergency Duration | ≥180 min | Charging Time | <=15 h |
| Transfer Time | <2s | IP Rating | IP65 |
| Housing Material | Die-cast aluminum | Impact Resistance Grade | IK07 |
| Mounting | Wall-mounted / chain-hung (pendant) | Dimensions (mm) | 370 x 70 x 170 mm (single-sided) |
| Net Weight (kg) | 1.75 kg | Certification | CE / RoHS |
| Warranty | 5 years (battery 3 years) | MOQ | 100 |
| Operating Temperature | 0 C ~ +45 C | Cycle Life | >=500 cycles |
| Packing Size (cm) | 5 pcs/ctn; inner box 370 x 75 x 170 mm; carton 38 x 39 x 20 cm; N.W. 8.8 kg / G.W. 10.5 kg | Package Net Weight (kg) | 8.6 kg (per carton) |
| Package Gross Weight (kg) | 10 kg (per carton) | ||
Trade & Logistics Specifications
| Trade Terms | EXW |
|---|---|
| Package Size | 38 x 39 x 20 cm (carton) |
| Gross Weight | 10.5 kg (G.W. per carton) |
| HS Code | 9405429000 |
| Country of Origin | China |
Description
AS-F001 Explosion-Proof LED Emergency Exit Sign
The AS-F001 is an explosion-proof LED emergency exit sign for hazardous areas where explosive gases or combustible dust may be present — oil and gas fields, petrochemical and chemical plants, pharmaceutical factories, paint shops, gas stations, mines and tunnels. It runs 12 pcs DIP 5 mm LEDs on 3 W at 230 Vac from AC 85-265 V 50/60 Hz, holds a Li-ion 3.7 V battery with at least 180 minutes of emergency output, and is built into a die-cast aluminum flameproof enclosure rated IP65, Class I and IK07, measuring 370 x 70 x 170 mm and certified CE / RoHS with a 5-year warranty (battery 3 years).
Key Specifications at a Glance
- Model: AS-F001 single-sided explosion-proof emergency exit sign (AS-F001-2 double-sided: 300 x 75 x 190 mm)
- Light source: 12 pcs DIP 5 mm LED, long-life type
- Input power: 3 W at 230 Vac, load power 3 W, rated input current 0.02 A max at 230 Vac
- Input voltage: AC 85-265 V, 50/60 Hz
- Battery: Li-ion 3.7 V pack, charge current 200 mA, charging voltage 4.2 V +/- 0.1 V
- Charge time: 15 hours maximum to full charge
- Emergency time: at least 180 minutes, cycle life at least 500 cycles
- Operating mode: continuous (maintained); manual test button and automatic monthly / annual self-test
- Body: die-cast aluminum flameproof enclosure in silver, corrosion grade WF2, impact-resistant front window
- Protection: IP65 for indoor use, Class I, IK07 impact rating
- Operating temperature: 0 C to +45 C (short-term extreme -5 C to 50 C)
- Dimensions: 370 x 70 x 170 mm, unit weight 1.75 kg
- Certification: CE / RoHS; warranty 5 years, battery pack 3 years; MOQ 100 pcs

Flameproof Die-Cast Aluminum Enclosure
The one-piece die-cast aluminum body is finished in silver epoxy powder coating for corrosion grade WF2, so the sign survives coastal air, chemical plants and wash-down areas. Precision-machined flameproof joints contain any internal explosion inside the enclosure instead of transmitting it to the surrounding atmosphere. The impact-resistant front window is impact and heat resistant and rates IK07, and the whole unit stays dust-tight and jet-water protected at IP65 for indoor industrial use.
Continuous Operation, Self-Test and Status Indicators
The AS-F001 works in continuous (maintained) mode, so the EXIT legend stays lit whenever mains power is on. An MCU-based control board manages charge and discharge, runs fault self-diagnosis and switches to emergency mode automatically within a fraction of a second when the mains fails. Automatic tests run every 30 days for about 60 seconds and every 52 weeks for a full annual discharge after 24 hours of continuous charging; holding the test button for 4 seconds forces a 60-second monthly test, and holding it for 6 seconds forces a 30-minute annual test. Indicators are simple to read: red while charging, green when fully charged, green flashing slowly at 1 Hz in emergency mode, and red flashing quickly on a fault.

Efficient DIP LED Optics
Twelve DIP 5 mm LEDs sit behind the engraved EXIT panel, delivering even, glare-free emergency lighting at just 3 W of input power. The LEDs are long-life types, and the light colour can be specified in red, green, blue or white to match the panel process (engraving, printing or film overlay) and printing colour. Over-voltage, over-current, over-temperature, short-circuit and open-circuit protection with current limitation are built in, which keeps the battery and driver safe in unattended installations.
Installation, Packaging and Applications
Two mounting options are supported: direct wall mounting, or chain-hung suspension from pipes, trusses and other site structures. A metal outlet port on the side accepts conduit entry so the wiring stays protected by the flameproof enclosure, and the Class I design requires a protective earth connection. Each carton holds 5 pcs, with an inner box of 370 x 75 x 170 mm and a carton of 38 x 39 x 20 cm, net weight 8.8 kg and gross weight 10.5 kg. Typical applications include petrol stations, underground mines, chemical plants, pharmaceutical workshops and grain handling areas.
Downloads
Engineering files
A few details, then the download starts
This document asks for a few details before download. We use them to send you the version that covers your market, and nothing else.
Battery & Transport Compliance
Any product containing a lithium cell ships as dangerous goods. These are the fields a freight forwarder will ask for.
| UN38.3 test summary | Available on request |
|---|---|
| SDS / MSDS | Available on request |
Emergency Lighting Compliance — EN 1838
Questions About This Product
Where can the AS-F001 explosion-proof exit sign be installed?
How long does the sign stay lit during a power failure?
Is it maintained or non-maintained?
How do the self-test and the indicator lights work?
What are the electrical ratings and built-in protections?
What is the difference between AS-F001 and AS-F001-2?
What are the MOQ, certification, warranty and packing details?
Ask about AS-F001 Explosion-Proof LED Exit Sign, Die-Cast Aluminum IP65
Include quantity and destination and we reply with a specification and quotation.







